Bike Built!

IMG_5157

My Look 585 is built, with all credit to Francois/Francis and Thien of MTBR/RoadBikeReview, who soldiered through a long Friday night to make sure I looked pretty on Sunday's group ride. I've posted a photo below that makes it look like I actually did a lot of the wrenching, but, truth be told, I probably spent more time cleaning up my spilled beer. Thanks also goes to Sports Basement, which is rescued us from having to abort when we discovered that the threads on the bottom bracket needed to be chased.

IMG_5160 IMG_5167

My contributions: I attached the rear brake, right shifter, put ceramic bearings in the wheels, ran and cut some cabling, and did half of the bar tape. A pretty sorry total given the amount of effort that goes into a bike. I got to learn a lot from watching Francis handle a lot of the difficult wrenching, and Thien showed me the proper bike nerd details that one is supposed to pay attention to, such as cutting the rear brake housing so that the Dura Ace logo shows and lining up the tire logo with the valve stem. With ownership of an awesome bike comes great responsibility.

Build list:

  • Frame: Look 585 Origin
  • Group: Dura Ace shifters and derailleurs, Ultegra SL crank/brakes/cassette
  • Seatpost: something heavy scavenged from my old bike
  • Seat: Specialized Gel Toupe, also scavenged from my other bike
  • Wheels: Neuvation M28 Aero2 with Enduro ceramic bearings
  • Cockpit: Ritchey Pro stem and handlebar
  • Tires: Michelin Pro Race 3

This build is not 'final': based on the Ritchey booth at Sea Otter, I'm now eyeing their new Wet White finish for the WCS 4-Axis steam and WCS Logic II road bars. It currently has a Ritchey Pro cockpit and I scavenged a seatpost and saddle are from my old bike. The seatpost is especially heavy and is one of the reasons that the build topped out at 17.15 lbs instead of the planned 16.5 lbs. The frame also came in 0.33 lbs over, possibly due to the white paint. It should be in the 16 lbs range when I'm finally done.

IMG_5172 IMG_5171

IMG_5168

All the parts on this build were selected by doing research in the RoadBikeReview forums and the wrenching was done by Francois and Thien, so I can truly say, "This bike build powered by the good folks of:"

related articles: personal
tags: (14) (10) (7) (7)


Post a comment